Home
HelpFactor 10
eDH Procedure Code(s)
LAB2821 Coagulation Bleeding Tests
LAB3932 Bleeding Diathesis Screen
LAB758 Factor 10 Activity —LAB ONLY
LAB2119 Mixing Study —LAB ONLY
Order Questions
| Procedure | Question |
|---|---|
| LAB2119 Mixing Study |
|
| LAB2821 Coagulation Bleeding Tests |
|
| LAB3932 Bleeding Diathesis Screen |
|
Collection Information
1.8 mL Sodium Citrate tube filled to the line
OR
2.7 mL Sodium Citrate tube filled to the line
OR
DHMC Lebanon only: 1.0 mL Sodium Citrate microtainer filled to the line
Blue top tubes must be filled within 10% of stated volume. A discard tube must be used if a citrate tube is to be drawn using a winged blood collection set. It is important to remove air from the blood collection set to ensure the proper blood volume is obtained in the coag tube.
If the patient has a known hematocrit >55%, please contact the coagulation lab for an adjusted collection tube before drawing the blood.
DHMC Lebanon only: If needed, 1.0 mL sodium citrate tubes can be prepared by the laboratory. These are a non-vacuum orange screw cap tube with lab prepared anticoagulant. To obtain some of these custom tubes please call the coagulation laboratory at 5-9463.
Specimen Information
| Specimen Type | Specimen Source | Acceptable Containers | Minimum Test Volume (mL) | |
|---|---|---|---|---|
| Blood | Blood, Venous | Adjusted-F | 1.0 | |
| Blood | Blood, Venous | BluCit-F | 1.0 | |
| Blood | Blood, Venous | OrgCit-F | 0.5 | |
Shipping and Handling
Processing Instructions: Double spin, separate, and freeze.Transport Temperature: Frozen
Transport Instructions: N/A
Specimen Stability Unprocessed
Unprocessed: 4 hours
Specimen Stability Post Processing
Ambient: 4 hours
Refrigerate: N/A
Frozen: 2 weeks
Test Components
| Component | LOINC Code |
|---|---|
| FACTOR X ACTIVITY | 3218-5 |
Turnaround Time (TAT)
8 DaysCPT Code(s)
85260
Performing Lab Section
Coagulation