Sign in →

PTT

eDH Procedure Code(s)

LAB325 APTT

Collection Information

1.8 mL Sodium Citrate tube filled to the line
OR
2.7 mL Sodium Citrate tube filled to the line
Blue top tubes must be filled within 10% of stated volume. A discard tube must be used if a citrate tube is to be drawn using a winged blood collection set. It is important to remove air from the blood collection set to ensure the proper blood volume is obtained in the coag tube.
If the patient has a known hematocrit >55%, please contact the coagulation lab for an adjusted collection tube before drawing the blood.
Specimen drawn more than one hour prior to testing may not be reliable for Heparin monitoring (may be falsely low) if not spun immediately and separated from the cells.
DHMC Lebanon only: If needed, 1mL sodium citrate tubes can be prepared by the laboratory. These are a non-vacuum orange screw cap tube with lab prepared anticoagulant. To obtain some of these custom tubes please call the coagulation laboratory at 5-9463.

Specimen Information

Specimen Type Specimen Source Acceptable Containers Minimum Test Volume (mL)
Blood Blood, Venous BluCit-F 0.3
Blood Blood, Venous Adjusted-F 0.3

Shipping and Handling

Processing Instructions: Double spin, separate, and freeze.

Transport Temperature: Frozen
Transport Instructions: N/A

Specimen Stability Unprocessed
Unprocessed: 4 hours at Room Temperature
Specimen Stability Post Processing
Ambient: 4 hours
Refrigerated: N/A
Frozen: 2 weeks

Test Components

Component LOINC Code
PARTIAL THROMBOPLASTIN TIME 14979-9

Turnaround Time (TAT)

STAT 1 Hour
Routine 4 Hours

CPT Code(s)

85730

Performing Lab Section

Coagulation

Performing Lab(s)

Alice Peck Day Memorial Hospital Laboratory (APD)
Cheshire Medical Center Laboratory (CHE)
Dartmouth Hitchcock Medical Center Laboratory (MHMH)
Mt. Ascutney Hospital and Health Center Laboratory (MAH)
New London Hospital Laboratory (NLH)